User manual

CONTROL PANEL
BUTTONS
Sensor field / Button Function Description
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.
DISPLAY
A B
DG EF C
A. Timer
B. Heat-up and residual heat indicator
C. Water drawer (selected models only)
D. Core temperature sensor (selected models
only)
E. Door lock (selected models only)
F. Hours / minutes
G. Demo mode (selected models only)
H. Clock functions
BEFORE FIRST USE
WARNING! Refer to Safety chapters.
To set the Time of day refer to "Clock
functions" chapter.
INITIAL CLEANING
Remove all accessories from the oven.
Refer to "Care and cleaning" chapter.
Clean the oven and the accessories before first
use.
Put the accessories back to their initial position.
PREHEATING
Preheat the empty oven before first use.
1. Set the function and the maximum
temperature.
2. Let the oven operate for 1 hour.
3. Set the function and set the maximum
temperature.
4. Let the oven operate for 15 minutes.
5. Turn off the oven and let it cool down.
Accessories can become hotter than usual. The
oven can emit an odour and smoke. Make sure that
the airflow in the room is sufficient.
DAILY USE
WARNING! Refer to Safety chapters.
TURNING THE OVEN ON AND OFF
1. Turn the knob for the oven functions to select
an oven function.
2. Turn the knob for the temperature to select a
temperature.
3. To turn off the oven, turn the knobs for the oven
functions and temperature to the off position.
The lamp turns on when the oven operates.
6