User manual

ManualsBrandsFaure Manualskitchen & houseware accessoriesFOP27001XA

Heat-up indicator

When you activate an oven function, the bars in the

display come on one by one. The bars show that the

oven temperature increases or decreases.

Clock functions

Clock functions table

Clock function Application

TIME OF DAY To set, change or check the time of day. Refer to "Setting the time".

MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min). This function has

no effect on the operation of the appliance. You can set the MINUTE

MINDER at any time, also if the appliance is off.

DURATION To set how long the appliance operates. Use only when an oven function

is set.

END To set when the appliance must deactivate. Use only when an oven

function is set. You can use Duration and End at the same time (time

delay), if the appliance is to be activate and deactivate automatically lat-

er.

Press again and again to switch

between the clock functions.

To confirm the settings of the clock

functions, press or wait 5 seconds for

an automatic confirmation.

Setting the DURATION or END

1. Set an oven function.

2. Press again and again until the display shows

or .

or flashes in the display.

3. Press or to the set the values and press

to confirm.

For Duration first you set the minutes and then the

hours, for End first you set the hours and then the

minutes.

An acoustic signal sounds for 2 minutes after the time

ends. or symbol and time setting flash in the

display. The oven stops.

4. Press any button to stop the acoustic signal.

5. Turn the knob for the oven functions to the off

position.

If you press when you set the hours

for DURATION , the appliance goes

to setting of the END function.

Setting the MINUTE MINDER

1. Press again and again until and "00" flash in

the display.

2. Press or to set the MINUTE MINDER.

First you set the seconds, then the minutes and

then the hours.

At first, the time is calculated in minutes and

seconds. When the time you set is longer than 60

minutes, the symbol comes on in the display.

The appliance now calculates the time in hours and

minutes.

3. The MINUTE MINDER starts automatically after

five seconds.

After 90% of the set time, an acoustic signal

sounds.

4. When the set time ends, an acoustic signal sounds

for two minutes. "00:00" and

flash in the

display. Press any button to stop the acoustic

signal.