English Model No.
English Thank you for purchasing this Clarion product. • Please read this owner’s manual in its entirety before operating this equipment. • After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). • Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES ������������������������������� 3 Expanding Systems ���������������������������� 3 2.
English 1. FEATURES • Built in Bluetooth® handsfree (HFP) and audio streaming (A2DP & AVRCP) • Sound Quality Correction by Intelligent Tune Expanding Systems Expanding audio features 4 Chanel Amplifier USB Memory Portable Player (Connect via AUX IN Jack) Bluetooth cellular phone Note: • The items listed only show connectivity options and are not included with the unit.
English 2. PRECAUTIONS WARNING For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. INFORMATION FOR USERS: This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate.
English 3.
English 6 Names of Buttons No.
• Be sure to read this chapter referring to the front diagrams of chapter “Operational pannel” on page 5. • If the sound becomes distorted it will be the result of the selected combination of sound adjustment settings such as, Virtual Bass, Sound Restorer, Dynamic Beat Enhancer, Bass/ Treble and Graphic Equalizer. In such an event please lower the level of effect. English 4. OPERATIONS Notes: Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key.
English Basic Operations Alarm Setup 1. Press [DISP] button to switch to the clock display. 2. Press and hold [DISP] button. 3. Then press [x] or [v] button to select the item "SET ALARM", and press [ROTARY] knob. SET CLOCK SET ALARM 4. Turn [ROTARY] knob to switch between "ON" and "OFF". ON: Turn on the alarm. OFF: Turn off the alarm. If you want to set alarm, you should switch to "ON" and press [ROTARY] knob. Then do the next operations. 5. Press [x] or [v] button to select hour or minute. 6.
You can adjust a sound effect or tone quality to your preference. 1. Press [ ] button. 2. Then press [x] or [v] button to select the sound setup item: G-EQ *1 ※ BASS *2 TREB *2 BAL FAD INTEL-TUNE ※ LOUD Notes: *1 This item can be performed only when the system item “EQ-SELECT” is set to “G EQ”(page 11). *2 These items can be performed only when the system item “EQ-SELECT” is set to “BASS/TREB”(page 11). ※ You should press [ROTARY] knob to adjust the setting for these items.
English 10 Sound Setup Setting Intelligent Tune 1. Select “INTEL- TUNE” in audio items, and press [ROTARY] knob. 2. Press [x] or [v] button, the tone effect changes. S-RESTORER V-BASS D-BEAT • S-RESTORER (Sound Restorer): full quality sound reproduction of compressed audio data (default: OFF) • V-BASS (Virtual Bass): delivers powerful lows just like an add-on subwoofer (default: OFF) • D-BEAT (Dynamic Beat Enhancer): (default: OFF) 3. Press [ROTARY] knob. 4. Turn [ROTARY] knob to adjust the value.
1. Long press [ ] button. 2.
English System Setup Auto Answer Pin Code Setting This is a setting to determine whether any incoming call will be automatically or manually answered. This pin code is used during pairing. A maximum of 10 digits can be changed through this unit. ∗ The factory default setting is “OFF”. ∗ The factory default pass key is “1234”. 1. Select “A-ANSWER” in system setup items. 2. Turn [ROTARY] knob to select “ON” or “OFF”. ON: Any incoming call is automatically answered in 5 seconds.
Listening to the radio Band scan 1. Press [SRC] button and select the radio mode. 2. Press [BND] button and select the radio band in the following order: FM1 FM2 FM3 AM1 AM2 FM1... Switching display Band scan is searching for good reception stations from current frequency to higher frequency repeatedly. When a good reception stations is searched, it will be listened in 7s. And then it continues scan. 1. Press [BND] button to select a band. 2. Long press [BND] button.
English CD/MP3/WMA Operations This unit can play back MP3/WMA files Note: • If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output. Instead, “– –:– –” will blink for 5s in the play time, and then go to the next track to play. To disable DRM (Digital Rights Management) When using Windows Media Player 9/10/11, click on TOOL OPTIONS MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files.
Notes: • Never insert foreign objects into the CD SLOT. • If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. • Discs not bearing the mark and CD-ROMs cannot be played by this unit. • Some CDs recorded in CD-R/CD-RW mode may not be usable. Pausing play 1. Press the [ ] button to pause play. 2. To resume CD play, press the [ ] button again. Switching display This unit can display title data.
English CD/MP3/WMA Operations Repeat play 1. Each time you press [6] button: CD-DA disc - Repeat one Repeat all MP3/WMA disc - Repeat one Repeat folder Repeat all Repeat one - Play the current track repeatedly. Repeat folder - Play all the tracks of the current folder repeatedly. Repeat all - Play all the tracks of the disc repeatedly. Random play 1.
Mobile phones and audio devices that support Bluetooth can be connected for use on the unit. Notes: Bluetooth Audio Operations • This system will not operate or may operate improperly with some Bluetooth audio players and Bluetooth mobile phones. • Browse the Clarion website to confirm mobile phone compatibility list. • Pausing Play • Selecting a track • Fast-forward/Fast-reverse Bluetooth Pairing Please pair this unit from your Bluetooth device. Up to a maximum of 3 Bluetooth devices can be paired. 1.
English Bluetooth Operations Bluetooth Telephone Operations Switch to Bluetooth Telephone Mode Press the [SRC] button to switch to “BT -TEL” mode. Make Outgoing Call There are 3 ways to make outgoing call. • You can press [ ] button to hang up during calling. • You can press [ROTARY] knob during calling, the mic will be muted. Press it again will cancel mute. • Call from Phonebook User can search the contact name in the phonebook and make call. Alternatively, user can call from mobile phone. 1.
AUX function This system has an external input jack on the front panel so you can listen to sounds and music from external devices connected to this unit. English AUX Operations Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. ∗ The factory default setting is “MID”. 1. Select “AUX SENS” in system setup items(page 11). 2.
English 5. TROUBLESHOOTING General Problem Power cannot be turned on. Measure Replace with a fuse of the same amperage. If the fuse blows again, consult your dealer. Incorrect wiring. Consult your dealer. No sound output Power antenna lead is 1. Turn the unit off. when operating the shorted to ground or 2. Remove all wires attached to the power unit with amplifiers excessive current is antenna lead.
Problem No sound heard Cause MP3/WMA files are absent in a disc. Files are not recognized as an MP3/ WMA file. File system is not correct. Compact disc is dirty. Compact disc is heavily scratched or warped. MP3/WMA files are not encoded properly. Water droplets may form on the internal lens when the car is parked in a humid place. File system is not correct. Measure Write MP3/WMA files onto the disc properly. Use MP3/WMA files encoded properly. Cause The device contains no MP3/WMA files.
English Bluetooth Problem Cannot pair the Bluetooth enabled device with the car audio system. The Bluetooth hands-free audio quality is not improved after connection with a Bluetooth-enabled device. 22 Cause The device does not support the profiles required for the system. The Bluetooth function of the device is not enabled. The Bluetooth information does not match. The external microphone is not set correctly nor properly positioned. Measure Use another device to pair.
Disc Play USB Error Display CD MECHA ERROR DISC ERROR Cause This is a failure of CD deck’s mechanism. A CD cannot be played due to scratches, etc. A CD is loaded upside-down inside the CD deck and does not play. NO FILE No MP3/WMA file is recorded in the device. USB ERROR Protocol or File system is not correct. NO DEVICE No connection or the connection is loose. NO FILE No MP3/WMA file is stored in the device. HUB NOT The HUB devices are not SUPPORT supported.
Radio section General Receiving Frequencies: FM : 87.90 to 107.90 MHz (0.2 MHz steps) AM : 530 to 1,710 kHz (10 kHz steps) Output Power : 12W X 4 ( +B=26.4V) Power Supply Voltage : 24V DC , negative ground Power Consumption: Less than 15 A Speaker Impedance : 8-16 Ω Weight of Main unit : 1.09 kg Dimensions of Main unit: 180 (W) X 50 (H) X 175 (D) mm MP3/WMA MP3: Sampling rate 8 kHz-48 kHz, Bit rate 32 kbps-384 kbps / VBR WMA: Sampling rate 22.
English Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
