User Manual

5


Module Specifications
System
Host Interface
(USB / UART/ RS232 / LED / Reset / Debug Port / GPIO / SAMBA / VCC in / GND)
Chipset
PHY: Impinj R2000
MAC: ATMEL AT91SAM7S-256
Operating Voltages
12.0V+/-5% or 5.0V+/-5% (option)
DC Power
12V:1.5A @ 30dBm; 5V:3A @ 30dBm
Protocol
RFID Protocol Support
EPC Gen 2
ISO 18000-6C
Support EPC DRM
Yes (with DRM Filter) SW Switchable
RF
Frequency
US: 902 ~ 928MHz（FHSS）
EU: 865 ~ 868MHz
Demodulation
PR-ASK
Modulation Depth
90% nominal
Data Encoding
FM0 or Miller code
Bit Rate
Supports uplink data rates of up to 640 Kbps
TX Output power
5 ~ 30dBm in 1dB step
Antenna Type
8 Port Mono-static and 4 Port Bi-static SW selectable
Antenna connector
8 SMA connectors
Regulatory and Environmental Compliance
EMC certification
FCC 47 CFG Ch.1 Part 15 (US)
ETSI EN 302 208-1 (V1.1.1) (EU)
Temperature Range Operating: 0 ~ 55 degree C, Storage: -20 ~ 85 degree C
Humidity 10% ~ 85% Non-condensing
Software
Driver Windows XP / Linux Embedded
Mechanical
Dimension 196mm x 50mm x 15mm ± 1mm
Table 1 - Module Specification of the FS-GF801