Product Card

China: [phone]
Germany: [phone]
USA: [phone]
India: [phone]
Japan: +070 4127 5167
[e-mail]
[e-mail]
www.faytech.com
Touch Panel
PC System
Power
Product name 10.1" Embedded Touch PC
Article code / EAN number
FT101V40 / 69207340010820
Power Indicator Green LED
Power Supply 100-240V ACDC active switching; 12V DC-Out
Working Power (V) 8~18
Power Consumption (W) 11
Stand-By Consumption (W) <1
CPU Allwinner
®
V40 QuadCore
Chipset Cortex A7
Graphic GPU ARM
®
Mali400 Mp2 Complies with OpenGL ES 2.0/1.1
Audio
Memory 1x 1GB DDR3
Integrated HI-FI 100dB Audio Codec Dual analog mic, 2x6W amplifier
Storage 8GB EMMC Flash
Network 10/100Mbit Network; W-LAN
OS Android 6.0
Touch Technology Projected Capacitive 10-Point Multitouch
Touch Connector USB
Touch Life (Contacts) Unlimited
Surface Hardness 7H
Surface Treatment Anti-glare (chemical etched)
Operation / Mechanical
LCD Panel
Screen diagonal (Inch/cm) 10.1/25.65
Display active screen size (cm) 21.70×13.60
Aspect ratio 16:10
Physical resolution 1280×800
External Maximum showable resolution - DP 1920×1080
Colours displayed 16.7M
Brightness (cd/m
2
) 350
Contrast 700:1
Typical reaction time Tr/ Tf (ms) 10/15
Visual Angle horizontal/vertical (°) 170/170
Backlight / Backlight Lifetime (hours) LED / 20,000
Operating Temperature (°C) -10 ~ +60
Humidity Range (RH) 10% - 90%
Net weight (kg) 2.00
Gross weight (kg) 2.90 (incl. cartonage)
Housing material Rubber Front Case, Plastic Back Case
Housing (cm) L × W × H 27.60 × 19.20 × 3.35
Mounting VESA 100
IP Rating
IP65 Front / IP40 Back
29.1 217.8
29.1
27.8 136.4 27.8
192.0
33.5
11.5
23.6 228.9 23.6
16.1 159.9 16.1
88.0 100.0
88.0
46.0 100.0 46.0
276.0
Internal Connectors
1x SD-card
1x SIM-card
2x Serial
4x TTL UART
2x USB 2.0
18/24Bit LVDS
1x Line-In
1x Line-Out
1x Amplifier for 2x6W loudspeaker
1x SATA-Port
1x RTC
1x CAN Bus
External Connectors
1x 8-18V DC-In (screwable)
2x USB 2.0
1x USB OTG
1x Serial
1x 10/100Mbit RJ45 Port
1x Audio-In
1x Audio-Out
1x W-LAN-connector
1x HDMI
4x GPIO
1x SD-card slot
1x SIM-card slot
Expansion slots
1x MiniPCIe
Included in the Delivery
Power Supply (see Power section)
W-LAN Antenna
Short Installation Manual
Standard Stand
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
FCC ID: 2AC8IFT101V40