Installation Instructions

Chapter "Using Remote fX and Remote bX"
68
evation |
2 7. 4 Restart drive system
► Press and hold the center button for 8 seconds to fully shut down your
drive system: All LEDs go out.
When the drive system is ready to be switched on again, the status
indicator flashes green: Now you can restart your drive system as usual.
2 7. 5 Rain mode
The rain mode prevents rain drops from unintentionally adjusting the
support level of your e-bike.
If you have activated the rain mode, use the center button to set the desired
support level:
1. Activate the rain mode by holding down the center button for 2 seconds.
A short blue LED animation appears.
2. In rain mode, press the center button 1x briefly to switch to the next
higher support level.
By briefly pressing the center button again, you can switch to the next
higher support level in the following order:
no support
→
"Breeze
→
"River
→
"Rocket"
→
no support etc.
3. To return from the rain mode to the regular operating mode, press and
hold the center button again for 2 seconds.
2 7. 6 Switching bicycle lighting on and off

Depending on the model, your e-bike has a bicycle light that
you can switch on and off using the Remote fX / Remote bX.
IMPORTANT: The bicycle lighting can only be switched on
and off in regular operating mode using the Remote fX /
Remote bX, not in rain mode!
1. If necessary, deactivate the rain mode by pressing and holding the
center button for about 2 seconds.
2. Press the center button once briefly to turn on the bicycle lights.
3. Press the center button again once briefly to turn off the bicycle lights.