How-To Guide

23
Chapter "Usage"
| evation
3. Place the battery with the connecting contact first on the battery holder
of the drivepack.
D
A
4. Carefully insert the battery as far as possible into the battery holder
until you hear a click.
The battery is automatically locked when you have inserted it correctly.
If the battery does not lock, repeat the procedure. Do not use the drive
system if the battery cannot be locked. If the unlocked battery falls out
of the e-bike holder while riding, this can lead to an accident/fall and
damage the battery.
4.1.2 Mounting the drivepack on the e-bike
More detailed information can be found → in chapter 15.1 "Mounting the drivepack on
the e-bike".
1. Place the drivepack with the interface for the bottom bracket in front
of the corresponding interface on the bottom bracket.
2. Swing the upper end of the drivepack into the down tube of the e-bike.
The drivepack is automatically locked in place when the two interfaces
on the drivepack and the bottom bracket are correctly engaged and the
drivepack is fully swiveled into the intended position on the down tube.
B
A
B
A