User's Manual

WEMS Installer’s Guide 23
WEMS Software
Figure 15. Current Device Settings Continuation Window for an i TLM-1.
Each device uses a different set of menus for configuring additional parameters.
To access these menus, select one of the tabs along the bottom of the screen.
Some menus are similar for all devices, and some menus are device-specific. All
devices have menus for configuration, uplink scheduling, updating firmware,
setting advanced parameters, and testing the device’s radio. The iCCU has a
status menu and an uplink menu, and sensor devices have calibration menus and
a data menu.