User's Manual

WEMS Installer’s Guide 39
WEMS Software
iWPM-T Temperature Calibration
To set the temperature calibration parameters, select the Temp Cal tab at the
bottom of the screen to access the temperature calibration menu shown in
Figure 28 below. Select the proper Source from the pull-down list. The choices
for Source are Internal for the iWPM-T, and External for the iWPM-T which has
an external temperature sensor. Enter the correct Slope and Intercept, and hit
the Set Temperature Cal button. The iWPM-T uses the temperature data to
compensate for the effects of temperature on the pressure measurement.
Figure 28. i WPM-T Temperature Sensor Calibration Menu.