User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
14 Chapter 3
WEMS Software
must contain a CF slot and SD slot, and must run PocketPC
®
Version 3.0 or higher.
Follow the steps below to install and initialize the WEMS Software.
1 Insert the iCFR into the CF slot on the PocketPC
®
.
2 Insert the SD Card containing the WEMS software into the SD slot on
the PocketPC
®
.
3 Access the files on the SD Card. The SD Card will contain two programs
as shown in Figure 3-2 below.
Figure 3-2. WEMS Software Programs on the SD Card.
4 Execute either one of the programs.
5 The first time the program runs, it will ask for the location of the iCFR
as in Figure 3-3 below.