User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
Oil & Gas Wireless Enabled Monitoring System 21
Installer’s Guide
Finding Sleeping Devices
If a known device does not respond when interrogated, the device may be
“sleeping”, and the Resync Time may be set to only wait for devices in fast mode.
By default, the software searches for the device for the time interval specified in
the setup menu. To wake a sleeping device, enter its serial number in the
appropriate space under Find Sleeping Sensors in the main menu, and hit the
Wake button. If the software still does not find the sleeping device, increase
the search time to 121 seconds. If the software fails to find the device after 121
seconds, check the device for possible battery failure. Using Find Sleeping Sensors
overrides the time interval selected in the setup menu. Note: Find Sleeping
Sensors wakes the device and places it temporarily in Always On mode which
significantly increases power consumption.