User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
24 Chapter 3
WEMS Software
Configuration Menus
Luna iMonitoring preconfigures the settings for all its devices. To view the current
settings or to reconfigure the device, select the device in the main menu and hit
the Configure button to bring up one of the menus shown in Figure 3-10. Menu
(a) shows the sensor configuration menu for an iWPM-T, but other sensor
configuration menus contain the same information and options. The sensor menu
includes the serial number for the iCCU to which the sensor uplinks. If the CCU
field contains all zeros, as in Figure 3-10, then the sensor broadcasts to all listening
iCCUs. Menu (b) shows an iCCU configuration menu which does not include the
CCU field.
Figure 3-10. Configuration Menus for an (a) i CCU, and an (b) i WPM-T.
To change a parameter value, first highlight the value with a single tap, then
enable the value for editing with another tap. Now select the keyboard entry
(a) (b)