User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
44 Chapter 3
WEMS Software
iWPM-T Temperature Calibration
To set the temperature calibration parameters, select the Temp Cal tab at the
bottom of the screen to access the temperature calibration menu shown in
Figure 3-26 below. Select the proper Source from the pull-down list. The choices
for Source are Internal for the iWPM-T, and External for the iWPM-T which has
an external temperature sensor. Enter the correct Slope and Intercept, and hit
the Set Temperature Cal button. The iWPM-T uses the temperature data to
compensate for the effects of temperature on the pressure measurement.
Figure 3-26. i WPM-T Temperature Sensor Calibration Menu.