User Manual

3
3
3
3
3
3
3
3
3
3
3
3
3
3
Oil & Gas Wireless Enabled Monitoring System 45
Installer’s Guide
PocketDataViewer
The other software program on the SD Card is PocketDataViewer which
downloads a set of data points from a sensor device to the PocketPC
®
. Figure 3-31
below shows the main menu for the program. This program also includes the
same Setup Options and Help About windows as in PocketConfig which are
discussed in the following sections.
Setting the Default ReSync Time
The ReSync Time selected in the setup menu determines how long the software
waits for a response from a device. To access this menu, select the Setup tab
on the main menu, and hit the Options button shown in Figure 3-27 below.
Figure 3-27. Accessing the Setup Menu.