Data Sheet

APPLICATIONS
TECHNICAL SPECIFICATIONS PHYSICAL SPECIFICATIONS
The FBT VERTUS CLA 406.2A two-way bi-amplified speaker system incorporates 4 x 6,5” custom woofer with 1,5” voice coil and 1
x 1,4" B&C HF neodymium driver with 2,5 voice coil. The internal Class D amplifier module constructed in die-cast aluminum
delivers 600W for LF, 300W for HF and DSP processor with 8 equalization presets provide unexpected dynamics in a system of these
dimensions. The FBT VERTUS CLA 406.2A shall meet the following performance criteria: frequency response from 65Hz to 20kHz,
maximum SPL of 133dB, horizontal coverage angle of 100°, vertical coverage angle 25°. The FBT VERTUS CLA 406.2A feature a
0,47" birch plywood with internal metal bracing and the front shall be protected by a heavy duty metal grille. The control panel
provides Level control, HF level, Preset, HP filter, Gnd lift, 3 status led ( on, peak, prt/limit ), XLR input & link and Neutrik Powercon
Cable Duplex for power supply. Via new hardware it is possible to couple two or more CLA 406.2A/CLA 206A with an angle of 0°-20°
in 5° steps vertically and additional accessories are available for system suspension; four lateral inserts ( two upper and two lower)
designed to accept quick release pins or M10 screws. It can be integrated elegantly and with minimal intrusion into any environment;
it is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations.
Ideal for both live applications, assisted by the CLA118SA active subwoofer, as
well as for fixed installation
2 way bi-amplified line array column
0,47" birch plywood with scratch resistant varnish
4 x 6,5" custom woofer with 1,5" voice coil
Neodymium B&C compression HF driver with 1,4" throat and 2,5" voice coil
Class D 600W RMS amplifier for LF and 300W RMS for HF
DSP processor with 8 equalization presets
100°H x 25°V dispersion
Completely Manufactured in Italy
2 way bi- biamplified
65Hz - 20kHz
100° H x 25° V
1.2 kHz
640 W
AC Power requirement
133dB
190 x 1140 x 290mm
61,72 lbs / 28 kg
69,44 lbs / 31,5 kg
4 x 6,5" - 1,5" coil
7,48" x 44,88" x 11,41"
306 x 1256 x 416mm
12,04" x 49,44" x 16,37"
0,47" birch plywood
Built-in Amplifiers LF / HF *
max.: 600W RMS / 300W RMS
max. peak.: 1200W / 600W
Input Impedance
22kOhm
Maximum SPL ( peak ) **
16,40 ft / 5 mt.Power cord
XLR with loop
MAX.: 2mS burst, rms power on nominal speaker impedance
MAX PEAK: based on max peak output voltage and nominal speaker impedance
PEAK SPL: free space, based on max peak power amp rating and system peak sensitivity, 10mS time average
1 x 1,4" - 2,5" coil
CLA 406.2A
Active Column Line Array
FEATURES
PRODUCT DESCRIPTION