User manual

SAFETY WARNINGS
IMPORTANT
• To prevent inductive effects from causing hum, noise and a bad system working, loudspeaker lines should not be laid together with other electric
cables (mains), microphone or line level signal cables connected to amplifier inputs.
• Loudspeaker lines (amplifier outputs) can have a sufficiently high voltage (i.e. 100 V) to involve a risk of electrocution: never install or connect this
loudspeaker when the line is alive.
• Make sure that no objects or liquids can get into this product, as this may cause a short circuit.
• Use only the optional devices / accessories specified by the manufacturer.
• Do not use solvents, alcohol, benzene or other volatile substances for cleaning the external parts of this product.
• Protect loudspeaker lines from damage; make sure they are positioned in a way that they cannot be stepped on or crushed by objects.
• VERTUS CLA 403T / 803T sound speakers must be installed by qualified staff only, strictly complying with the current regulations and safety
standards in farce in the country of installation.
• Make sure all connections have been made correctly and the loudspeaker input voltage (in a constant voltage system) or its impedance is suitable
for the amplifier output.
• La FBT ELETTRONICA SpA raccomanda che l'installazione di questo prodotto venga eseguita solamente da installatori professionali qualificati in
grado di eseguirla correttamente e certificarla in accordo con le normative vigenti.
• Also check the suitability of the support surface to which the product is anchored (wall, ceiling, structure, etc.), and the components used for
attachment (screws, screw anchors, etc.).
• Never attempt to carry out any operations, modifications or repairs that are not expressly described in this manual. Contact your authorized service
centre or qualified personnel.
11
Suited to both indoor and outdoor use, the VERTUS CLA range comprises two models: CLA 803T with eight 3" full range woofers and CLA 403T with
four 3" full range woofers. Both versions have the same sleek, lightweight and durable , powder-coated aluminum housing. Completely dustproof and
waterproof, the enclosure's grille is covered with a special hydrophobic fabric to ensure absolute rejection of all atmospheric agents. Full EN54-24
certification also means both columns can be used for emergency and evacuation applications. Both the CLA803T and CLA403T are characterized
by an integrated passive directivity control system which delivers a consistent frequency-based vertical dispersion, and which offers users the choice
of two angles - NARROW and WIDE. The new functionality guarantees enormous flexibility for the integrator, even allowing for the horizontal
mounting of columns. In addition VERTUS CLA enclosure is fully modular, so multiple enclosures can be linked. Other features include a 100V line
transformer with switchable power levels. A wide range of accessories is also available for total system configuration flexibility.
VERTUS CLA 803T:
• 8 x 3" fullrange custom woofers with 0.7" voice-coil
110°H x 40°V (wide)
• 100V / 120W line transformer with power selector
• Grille with hydrophobic fabric
• Passive column array
VERTUS CLA 403T:
• 4 x 3" fullrange custom woofers with 0.7" voice-coil
• Passive column array
• Extruded aluminum cabinet with powder coating
110°H x 50°V (wide)
• Ceramic screw-in connector with thermal fuse
• Vertical dispersion angle selector: 110°H x 15°V (narrow),
• 100V / 60W line transformer with power selector
• Grille with hydrophobic fabric
• Ceramic screw-in connector with thermal fuse
• Vertical dispersion angle selector: 110°H x 25°V (narrow),
• Extruded aluminum cabinet with powder coating
DESCRIPTION
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN