User manual

TECHNICAL SPECIFICATIONS
CLA 403T CLA 803T
CONFIGURATION
RATED NOISE POWER (100 hrs)
NOMINAL IMPEDANCE
NOMINAL IMPEDANCE (100V line)
SENSITIVITY
MAX. SOUND PRESSURE SPL
FREQUENCY RESPONSE
FULLRANGE DRIVER
HORIZONTAL DISPERSION (-6dB)
Mode NARROW = WIDE
500Hz - 360°
1kHz - 170°
2kHz - 125°
4kHz - 125°
8kHz - 100°
INPUT CONNECTOR
OPERATING / STORAGE TEMPERATURE
RELATIVE HUMIDITY
NET DIMENSIONS
TRANSPORT DIMENSIONS
NET WEIGHT
TRANSPORT WEIGHT
Acoustical measurement environment used for the specifications listed
in this table are made in free field condition
1 1
100W / 28.2 Vrms
50W / 28.2 Vrms
8 Ohm
16 Ohm
200 Ohm / 100 W
400 Ohm / 50 W
85 Ohm / 50 W
166 Ohm / 25 W
94 dB ( @1W/1m )
91 dB ( @1W/1m )
112 dB / 100 dB ( @1m/4m )
106 dB / 94 dB ( @1m/4m )
150 Hz - 20kHz ( @ -6dB )
150 Hz - 20kHz ( @ -6dB )
8 x 3" / coil 0,75"
500Hz - 360°
1kHz - 170°
2kHz - 125°
4kHz - 125°
8kHz - 100°
VERTICAL DISPERSION (-6dB)
Mode WIDE
500Hz - 70°
1kHz - 35°
2kHz - 26°
4kHz - 26°
8kHz - 20°
500Hz - 160°
1kHz - 70°
2kHz - 36°
4kHz - 22°
8kHz - 20°
VERTICAL DISPERSION (-6dB)
Mode NARROW
500Hz - 70°
1kHz - 35°
2kHz - 18°
4kHz - 10°
8kHz - 10°
500Hz - 160°
1kHz - 70°
2kHz - 28°
4kHz - 14°
8kHz - 9°
ceramic terminal block
-25°C ÷ +55°C / -40°C ÷ +70°C -25°C ÷ +55°C / -40°C ÷ +70°C
< 95% < 95%
3,93" x 27,69" x 4,92" 3,93" x 14,48" x 4,92"
6,29" x 29,92" x 7,08" 6,29" x 16,53" x 7,08"
12,12 lb
6,61 lb
13,66 lb 7,71 lb
4 x 3" / coil 0,75"
ceramic terminal block
19
It is recommended to use an external DSP processor (e.g. FBT
DLM26) to improve system performance and reliability. The settings
are available on the website www.fbt.it in the section dedicated to
VERTUS CLA models.
reference plane
horizontal plane
reference axis
Loudspeaker physical references
RECOMMENDED AMPLIFIER 200 W RMS
100 W RMS