User Manual
Table Of Contents
- Statement
- Chapter I Product Introduction
- 1.1Product Overview
- 1.2Product Features
- 1.3 Service and Maintenance
- 1.4Automobile Inspection Notes
- 1.5 Product Help
- Chapter II Product Structure
- 2.1Host Hardware Instruction
- Chapter III Operation Manual
- 3.1 Connection of Power Supply & Main Testing Cab
- 3.2 Start Interface Menu
- Chapter IV Upgrade
- Chapter V OBD Pin detection
- Chapter VI Compliance Information
- Annex: Diagnostic Interface Definition and Descrip
- Chapter VII Warranty
CanDo HD Diagnostic Tablet
12
Chapter III Operation Manual
CANDO series product operatios are similar. Here we take general
version as an example and the display content of the host in practical work
shall prevail.
3.1 Connection of Power Supply & Main Testing Cable
3.1.1 Host Power Supply
There are 2 ways to connect supply power and the CANDO main unit.
1 Connect the power adapter (power adapter)
2 Dock the CanDo main unit on docking station
3.1.2 Wiring Method
Selection of power supply:
If the diagnostic socket does not have power supply, please choose one
power supply connection method to provide power supply to the host.
If the diagnostic socket has power supply, connection to other power
supply cable is not necessary.
Connection of standard-OBD-II socket