User Manual
Table Of Contents
- Statement
- Chapter I Product Introduction
- 1.1Product Overview
- 1.2Product Features
- 1.3 Service and Maintenance
- 1.4Automobile Inspection Notes
- 1.5 Product Help
- Chapter II Product Structure
- 2.1Host Hardware Instruction
- Chapter III Operation Manual
- 3.1 Connection of Power Supply & Main Testing Cab
- 3.2 Start Interface Menu
- Chapter IV Upgrade
- Chapter V OBD Pin detection
- Chapter VI Compliance Information
- Annex: Diagnostic Interface Definition and Descrip
- Chapter VII Warranty
CanDo HD Diagnostic Tablet
13
Connection of non-OBD-II interface
Vehicle necessary conditions:
1. Please confirm the diagnostic socket position and its shape, then check
whether it needs external power supply or not.
2. Please select corresponding connectors according to the vehicle
models and the shape of diagnostic sockets.
3. One end of the main testing cable is connected to the host and the
other end is connected to the diagnostic connector.
4. Please insert the diagnostic connector that has been connected to the
main testing cable into the vehicle diagnostic socket.
5. Turn on the machine , Please confirm the host is connected to the
vehicle diagnostic socket.
Remark: The automobile diagnostic interface is standard OBD-II interface
and two ends of the main testing cable are separately connected to the
OBD-II connector and the auto diagnostic tool. The process is completed
after inserting the OBD-II connector into the automobile diagnostic socket,
please identify it according to the actual vehicle configuration because not
all vehicles are standard OBD-II connectors.
3.1.3 Startup and Shutdown
Startup: Connect the host and power supply by any method mentioned