User Manual
Table Of Contents
- Statement
- Chapter I Product Introduction
- 1.1Product Overview
- 1.2Product Features
- 1.3 Service and Maintenance
- 1.4Automobile Inspection Notes
- 1.5 Product Help
- Chapter II Product Structure
- 2.1Host Hardware Instruction
- Chapter III Operation Manual
- 3.1 Connection of Power Supply & Main Testing Cab
- 3.2 Start Interface Menu
- Chapter IV Upgrade
- Chapter V OBD Pin detection
- Chapter VI Compliance Information
- Annex: Diagnostic Interface Definition and Descrip
- Chapter VII Warranty
CanDo HD Diagnostic Tablet
27
2. OBD-II Features
(1) Unified diagnostic socket shape is 16 PIN (needle), as shown
below.
(2) With a numerical analysis and data transmission function(DATA
LINK CONNECTOR-DLC).
(3) Unified fault codes and significance.
(4) With a driving recorder function.
(5) With a redisplay fault code memory function.
(6) Clear fault codes directly by the instrument function.
3. DLC (Data Transmission Connector) Diagnostic Socket Unified
Standard
(1) DLC diagnostic socket unified as standard 16PIN, mounted in the
cab, under the driver side instrument panel.
(2) There are two standard DLC pins: ISO - European standard
（INTERNATIONAL STANDARDS ORGANIZATION 9141-2）, use 7#, 15# pin
to transfer data.
Each terminal function of OBD-II diagnostic blocks shown in Table 1.