Copyright © 2018 GRANDMARK Ltd. www.fcmponline.com Thank you for purchasing our tumbling composter. INSTRUCCIONES DE LA MEZCLADORA DE ABONO TUMBLING COMPOSTER INSTRUCTIONS Gracias por adquirir nuestra mezcladora de abono. www.fcmponline.com Copyright © 2018 GRANDMARK Ltd.
Instalación de la mezcladora Seleccione primero un lugar para instalar su mezcladora que sea conveniente para trasladar los materiales, habitualmente cerca del jardín. Elija una superficie plana con suficiente espacio para poder rotar la mezcladora y, si es posible, seleccione un lugar bajo la luz solar directa, para facilitar la cocción del abono. - wood ashes - invasive plants/weeds (i.e. poison ivy) Para el armado, necesita una llave ajustable y un destornillador plano.
Preparación de los lotes de abono 1 De sl ic e la pu ➊ 2 Ag r eg To remove the finished compost, turn the barrel of the composter so the door is facing the ground and slide the door away from the chamber you want to empty. Make sure part of the door is still covering the unfinished side, which may not be ready to be emptied. Depending on the material you added your compost should be ready in 2 to 8 weeks. Finished compost will contain fine and coarse material.
CONSEJOS PARA LA PREPARACIÓN DE ABONO Las 3 reglas de la preparación de abono 1) Materiales de buena calidad y proporciones correctas de vegetales "verdes" (nitrógeno) y "marrones (carbono) –aproximadamente 1 parte de "verdes" a 2 partes de "marrones" 2) Mezcla consistente –se debe sentir como una esponja húmeda 3) Buena circulación de aire –gire la mezcladora cada dos o tres días después de que el lote se calienta, para ayudar a airear la mezcla y estimular una rápida descomposición Reciclado del césped: D
Assembly Instructions Instrucciones de armado Parts list: Lista de piezas: Packaged together at the factory: bb Parts C & D cc Parts A & E dd aa ff 1 Stand Assembly: Stand Assembly Order: BB > CC > DD > BB > CC > DD Armado del soporte: ✓ cc dd ✗ bb aa bb cc dd cc dd dd cc
www.fcmponline.com www.fcmponline.com Complete assembly information pictorial on our website Encuentre información pictórica completa sobre el armado en nuestro sitio web Note: Part-C must be the last panel installed on the part-A face closest to the circular vent or the pins will not line up correctly.