Datasheet

55
DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
ML 12/2008
0.3819.68
0.109
11.05 0.435 5.54 0.218 8.28 0.326
4.14
0
31.75 1.25 15.7 0.618 22.68 0.893
0.1092.77 0.2185.54
2.77 0
0.43511.05
22.68 0.893
1.4 0.055
0.163
1.2531.75
0.0551.4
0.1634.14 0.2726.91 0.3819.68
8.28 0.326
6.91 0.272
15.7 0.618
A3 A4A1 A2
1
10 17
0.1
9
0.1
9.4
0.1183
0.1
0.0391
0.37
0.42
2.54
10.67
9.45 0.372
2x 2.54 0.1
0
0.1092.77 0.2185.54 0.3268.28
0.43511.05 0.54413.82 0.65216.56 0.89322.68 1.2531.75
0.1092.77 0.2185.54 0.3268.28
22.68 0.893
0.61815.7
0.055
6.91 0.272
0
1.2531.75
4.14 0.163 6.91 0.272 9.68 0.381
12.42 0.489 15.19 0.598 17.96 0.707
9.68 0.381
0.0551.4 0.1634.14
1.4
11.05 0.435
A1 A2 A3
1
12 22
0.1
11
0.1
9.4
0.0391
0.1
0.1183
0.37
0.42
2.54
10.67
9.45 0.372
2x 2.54 0.1
0
0.1092.77 0.2185.54 0.3268.28
0.43511.05 0.54413.82 0.65216.56 0.89322.68 1.2531.75
2.77 0.109 5.54 0.218 8.28 0.326 11.05 0.435 13.82 0.544 16.56 0.652 22.68
4.14 0.163
0
0.893
0.0551.4 0.1634.14 0.2726.91 0.3819.68 0.48912.42 0.59815.19 0.59815.19 0.48912.42 0.3819.68 0.2726.91
1.4 0.055
31.75 1.25
A1
14
A2
25
0.1
1 13
0.1
0.37
1
9.4
0.039
10.67
9.45
2.54
0.372
0.1
3 0.118
0.42
2x 2.54 0.1
22.86 0.9 0
0.246.1
0.63216.05 0.922.86 1.2531.75
0.0962.44 0.3649.25
0.63216.05
31.75 1.25
A1 A2 A3 A4 A5 A6 A7
0.10.1
0.42
0.3729.45
10.67
3 0.118
2x 2.54 0.1
1 0.039
PCB Hole Pattern for Connectors with Right Angled PCB Terminations
Leiterplattenlochbild für Steckverbinder mit abgewinkeltem Leiterplattenanschluss
All PCB hole patterns apply to male connectors with right angle PCB contacts (signal contacts P5) and the metal bracket F1080-13B as well as the
coaxial contacts FME008P... or FME001P... (When using female connectors the hole pattern must be mirrored on the Y-axis).
Measurements without tolerances are in accordance with DIN ISO 2768 m.
Alle Lochbilder gelten für Stiftsteckverbinder mit abgewinkeltem Leiterplattenanschluss (Signalkontakte P5) und Metallwinkel F1080–13B sowie
eingebauten Koaxialkontakten FME008P... bzw. FME001P... (bei Verwendung von Buchsensteckverbindern muss das Lochbild an der Y-Achse
gespiegelt werden).
Maße ohne Toleranzangabe nach DIN ISO 2768 m.