Instructions / Assembly

BOILER TREAT ULTRA
Directions
For steam boilers:
Add one gallon for every 200 gallons of water through the vent or the opening
into the condensate tank or surge tank. Do not exceed pH 11.
For maintenance of steam boilers:
Add one quart to 50 gallons water to maintain
proper pH level and treat water completely.
For closed loop and hot water boilers: For closed loop and hot water boilers:
Add one gallon to every 300 gallons of water
in the system. Check to see pH goes to 11.5 for complete treatment.
For maintenance of closed loop and hot water boilers:
Use one quart
treatment to 100 gallons of make up water added to the system.
For blowdown:
Blowdown should be scheduled to maintain three to five cycles of concentration in
the steam boiler.