Operation Manual

T
_I_
142.00 mm
IE[§j
Thank you for purchasing the Waterproof Wireless Speaker.
Please read all instructions carefully before using and retain
this manual for future use and reference.
Operation Manual
Portable Waterproof Wireless Speaker
PAIRING THE SPEAKER:
I. Ensure the speaker is turned off. If it is not, please turn off the
speaker first before pairing.
2. Press and hold the Power On/Off button for 5-7 seconds until
the blue LED turns on. This will indicate your speaker is now in
pairing mode.
3. Place the speaker and the Wireless device to which you
would like to pair it within the operating distance. We recommend
keeping the two devices no further than 33 feet apart.
4. Ensure Wireless is enabled on your phone or music device.
Refer to the manufacturer's instructions for how to enable
Wireless on your device.
5. Once you have activated the Wireless on your device,
select the device from the list of available Wireless devices.
6. Please note, pairing mode on the speaker will last for two
minutes. If no devices are paired after two minutes, the speaker
will automatically return to standby mode.
7.
If pairing is unsuccessful, turn off the speaker first and re-pair
the following the
aforementioned steps. Once you have paired the
speaker with a device, the speaker will remember this device
and will pair automatically when the device's Wireless is
activated and in range. You do not need to re-pair any
previously connected devices.
If prompted, enter password or PIN Number
"fXXJJ'.
SPECIFICATIONS
Output: 3W
Input: DC
5V,
400mAh
Battery: 3.7V Lithium-ion battery
j
,
KEYS
1. Power / Pairing
3. Volume - / Previous
5. Microphone
7. USB Charge Port
2. Play / Pause
4. Hands-free
6. Volume+ / Next
CHARGING THE SPEAKER
The speaker comes with a built-in rechargeable battery. Before
using it for the first time, we recommend you charge the battery
fully. Only use the supplied USB cable to charge the speaker.
Connect the USB cable to a computer USB port and the Micro
USB plug to the charging port of the speaker. The red LED light
will illuminate while the speaker is charging.
A full charge of the battery takes around 2 hours. When the
battery is fully charged the LED light will turn off. Disconnect the
speaker at this point. The speaker will then be ready for use.
100.00
mm
SAFETY INSTRUCTIONS
Keep the unit away from heat sources, direct sunlight and corr
-osive liquid.
Do not use the unit if it has been dropped or
damaged in any way. Repairs to electrical equipment should only
be performed by a
qualified
electrician. Improper repairs may place
user at serious risk.
Do not puncture or harm the exterior surface of
the production in any way.
Keep the unit free from dust, lint, etc.
Do not use this unit for anything other than its intended use or
purpose. Doing so may damage the device.
This product is not a toy.
Keep out of reach of children.
Do not use the unit at excessive levels as this may damage
hearing.
Do not expose batteries, battery pack, or batteries installed to
excessive heat, such as direct sunlight, or open flame.
NOTE: DO NOT SUBMERGE SPEAKER
PACKAGE CONTENTS
• Portable Wireless Speaker
• Micro USB Charging Cable
• Aluminum Carabiner
• Operation Manual
KEY FEATURES
• Built-in rechargeable battery
• Volume control
• Built-in Microphone
• Suction Cup
• Aluminum Carabiner
3
4
7