User's Manual

5.1.2 Wifi Smart Configuration
For the first time you access the camera after it was reset or restore the factory settings,
you can set up the wifi in your camera directly, no need to connect the camera to router by
Ethernet cable.
You can set up the wifi step by step, like input the wifi password and choose the camera
you want to add in your LAN.
Note:
1) The camera can only support 2.4G wifi, do not support 5G wifi. If you have the 5G wifi
router, please mark sure it works in 2.4G if you want to use wifi to set up your camera.
2) Before you set up the wifi by the wifi smart configuration in FDT View App, please do
not connect the Ethernet cable to you camera. Then there is voice prompt from the
camera to show you the camera is waiting for wifi configuration.
3) All the camera in your LAN which is just reset and do not connect the Ethernet cable
can set up at the same time by the Wifi Smart configuration in FDT View App.
5.1.3 Scan the QR code in the bottom of the camera.