User's Manual

FDT Technologies-http://www.fdt.us
12
4.2.3 Access by IP address and http port
After launching the SearchTool, click the next to skip the welcome page and refresh the searching
page to bring up the cameras on your LAN. Then you can double click the camera you selected
to login by your default web browser, or you can open the web browser you want first and input
the camera’s IP address and http port in the URL address bar of the browser by manual to login
your camera. You can access the FDT camera by HTTP protocols as below:
http://LAN IP Address + HTTP Port No. For example: http://192.168.1.108:80.
You can find the LAN IP Address and http port of your camera through the SearchTool. The
default port is 80.
Here is a “Network Configuration” button in the right-clicking button list. From this button, you can
modify the IP, Device display name and http port of the FDT camera. Please note:
1. The camera will reboot automatically if you modify its http port.
2. Please enter the right username and password of your camera before you modify any network
configuration of the camera.