User's Guide

This document is supplied as ‘Commercial In Confidence’ business documentation. The contents of this document may
not be released to a third party without prior consent of FE Technologies or its authorised representatives.
User Documentation © FE Technologies 2018 Document No. 18.3 Issue No. 1.0 13
RFID your way
Processing items using the circulation assistant
Set your LMS client to the relevant screen (issues or returns).
The mini-window for the Circulation Assistant software on your screen should be in the
same mode as your LMS client (Issues or Returns) using one of the methods previously
explained.
Ensure the cursor is flashing in the Asset number field (barcode number field) in the LMS
client and place item(s) on the pad. The reader will enter the asset number in the field and
the LMS client will process the item.
In the issue mode, process the patron card as you would normally, using the barcode and
then place the cursor in the asset number field before placing the items on the pad.
If you are not using the auto synchronisation method, you must constantly
monitor for popup messages and quickly process them. If the popup message is not
actioned within the configured wait time, the system pass the asset number to the
popup message and will be lost and you will need to remove the items from the pad
and place unprocessed items on the pad again for reprocessing.