Getting Started Guide


5

Remarks:
(BP109alreadywiththebestworkcondition,noneedtosettheTxPower)
5>Deletethebeaconbroadcast
6>Setthebeaconbroadcastparameters
7>“AddBeacon”:Addanewbroadcast
8>Choosethebeacon“broadcasttype”
9>Fillinthebeaconbroadcastparameters
10>Click“Add”toFinish
11>Click“Save”.(Savethenewaddedbroadcastofthebeacon)

⑤Theaddedbroadcastwillshowinthebeaconinterfacelist.

⑥WhenthebeaconhasabuttonorG‐sensor,therewillbeG‐sensorandKeyoptions
intheapp.(asFigure8)
     Afterpoweron,thebeaconwillbroadcastattheintervalof1300ms(Value1)
WhenValue2is0,defaultsettingshowsG‐sensorisclosed.When G sensor is
triggered,beaconwillbroadcastattheintervalof100msandwillchangebackto1300ms
after35000ms(Value3)
When short press button (led light flash 1 times), beacon will broadcast at the
intervalof100ms(Value4)andwillchangebackto1300msafter35000ms(Value5)
    ThemeaningoftheKeyvalueisthesameasG‐sensor,butthetriggeredconditionis
shortpressthebutton.Pleasenotice:valuesof"Interval""Gsensor""Key"can'tbe0at
thesametime.
