User Guide
Table Of Contents
4
3. Input the default password: 000000. (as figure7, figure8)
Figure7 Figure8
4. After connected successfully, you can config the beacon parameters or add new
broadcasts, click Save after finished. (as figure9, figure10)
Figure9 Figure10
1> Change the device name
2> Change the device password, where it shows pin.
3> Interval: Set the beacon broadcast interval in milliseconds.
4> TxPower: This value decides the work distance. Support to change the TxPower
when need a shorter distance or save the battery life via -21dBm to 5dBm (-21dBm
shortest ,5dBm longest range)
7
1
2
3
4
5
6
10
9
8
11
深 圳 市 飞 易 通 科 技 有 限 公 司