Data Sheet

FSC-BT1006A Datasheet
Shenzhen Feasycom Technology Co.,Ltd www.feasycom.com
-6-
Module picture as below showing
Figure 1: FSC-BT1006A Picture
Kalimba DSP
Enhanced Kalimba DSP coprocessor, 80 MHz, 24-bit
fixed-pointcore
2 single-cycle MACs: 24x24-bit multiply and 56-bit
accumulator
32-bit instruction word, dual 24-bit data memory
6Kx32-bit program RAM including 1 K instruction
cache forexecuting out of internal ROM
16K x 24-bit + 16K x 24-bit 2-bank data RAM
Audio interfaces
Dual I²S outputs
I²S input,SPDIF input(uncompressed PCM only)
USB audio
Stereo audio ADC with line input, stereo audio DAC
Supported sample rates of 8, 11.025, 16, 22.05, 32,
44.1, and48 kHz
Physical interfaces
UART interface
USB 2.0 (full-speed) interface, including USB charger
detection
SPI interface for debug and programming
I²C master support
Up to 14 general-purpose PIOs
3 LED drivers with PWM flasher independent of MCU
Battery charger
Lithium ion / Lithium polymer battery charger
Charger supports 4.20 V and 4.35 V cells
Instant-on function automatically selects the power
supply betweenbattery and USB, which enables
operation even if the battery isfully discharged
Fast charging support
Up to 200 mA with no external components
Supports USB charger detection
Support for thermistor protection of battery pack
Support to enable end product design to PSE law:
 Design to JIS-C 8712/8714 (batteries)
 Testing based on IEEE 1725
Bluetooth features
Bluetooth v5.0 specification support
Qualcomm Bluetooth Low Energy secure connection
A2DP v1.3.1
AVRCP v1.6
HFP v1.7
HSP v1.2
SPP v1.2
DIDv1.3
HOGP v1.0
PXP v1.0.1
FMP v1.0
BAS v1.0
proximity pairing and proximity connection