Data Sheet

FSC-BT1006A Datasheet
Shenzhen Feasycom Technology Co.,Ltdwww.feasycom.com
-8-
2. General Specification
Table 1:General Specifications
Categories
Features
Implementation
Wireless
Specification
On-board chip
QCC3007
Bluetooth Version
V5.0 Dual-mode Bluetooth low energy radio
Frequency
2.402 - 2.480 GHz
Transmit Power
+8 dBm (Maximum)
Receive Sensitivity
-92.0 dBm (typ) π/4 DQPSK receiver sensitivity
and -82.0 dBm(typ) 8DPSK receiver sensitivity
Real-time digitised RSSI available to application
Raw Data Rates (Air)
3 Mbps(Classic BT - BR/EDR)
Host Interface and
Peripherals
UART Interface
TX, RX, CTS, RTS
General Purpose I/O
Default 115200,N,8,1
Baudrate support from 1200 to 921600
5,6,7,8 data bit character
GPIO
14(maximum – configurable) lines
O/P drive strength (4 mA)
Pull-up resistor (33 KΩ) control
Read pin-level
I
2
C Interface
1 (hardware I
2
C interface). Up to 400 kbps
Master and slave I
2
C interface
SPI Interface
SPI debug and programming interface with read accessdisable
locking
ADC Interface
Analog input voltage range: 0~ 1.3V
Supports single a 10-bit ADC and a 10-bit DAC
1 channels (configured from GPIO total)
USB Interface
1 full-speed (12Mbps)
Audio CODEC
SBC and AAC audio codecs
TrueWireless Stereo(TWS),which allows two devices to be configured
as a stereo pair
Configurable Signal Detection to trigger events
1 bank of up to 10-stage Speaker Parametric EQ
6 banks of up to 5-stage User Parametric EQ for musicenhancement
3Dstereo widening
Compander to compress or expand the dynamic range of the audio
Post Mastering to improve DAC fidelity
Dual I²S outputs with crossover
USB audio
Stereo audio ADC with line input, stereo audio DAC
Supported sample rates of 8, 11.025, 16, 22.05, 32, 44.1, and48 kHz
MIC SNR: 92 dB