Data Sheet

FSC-BT806BDatasheet
Shenzhen Feasycom Technology Co.,Ltdwww.feasycom.com
-7-
2. General Specification
Table 1:General Specifications
Categories
Features
Implementation
Wireless
Specification
On-board chip
CSR8670/CSR8675
Bluetooth Low energy
V5.0 Dual-mode Bluetooth low energy radio
Software complies with the Bluetooth Core v5.0 Specification
Support for Bluetooth basic rate / EDR and low energyConnections
3 Bluetooth low energy connections at the same time asbasic rate
A2DP
Frequency
2.402 - 2.480 GHz
Transmit Power
+10 dBm (Maximum)
Receive Sensitivity
-88 dBm(Typical)
Real-time digitised RSSI available to application
Raw Data Rates (Air)
3 Mbps(Classic BT - BR/EDR)
Host Interface and
Peripherals
UART Interface
TX, RX, CTS, RTS
General Purpose I/O
Default 115200,N,8,1
Baudrate support from 1200 to 921600
8 data bit character
GPIO
23(maximum – configurable) lines
O/P drive strength (4 mA)
Pull-up resistor (33 KΩ) control
Read pin-level
I
2
C Interface
1 (hardware I
2
C interface). Up to 400 kbps
Master and slave I
2
C interface
SPI Interface
SPI debug and programming interface with read accessdisable
locking
ADC Interface
Analog input voltage range: 0~ 1.3V
Supports single a 10-bit ADC and a 10-bit DAC
1 channels (configured from GPIO total)
USB Interface
1 full-speed (12Mbps)
Digital audio
parameters--CSR8670
80MHz RISC MCU and 80MIPS Kalimba DSP
16-bit audio
Supported sample rates of 8, 11.025, 16, 22.05, 32, 44.1,48 and
96kHz (DAC only)
Digital audio
parameters--CSR8675
80 MHz RISC MCU and 120 MHz Kalimba DSP
Up to 120MIPS DSP for intensive digital signal processing algorithms
24-bit audio
Supported sample rates of 8, 11.025, 16, 22.05, 32, 44.1,48,96kHz
and 192kHz (DAC only)
Profiles
BR/EDR
SPP (Serial Port Profile) - Up to 600 Kbps
A2DP/AVRCP/HFP/HSP/HID/PBAP/SPP Profiles support