Data Sheet

FSC-BT836B

Shenzhen Feasycom Technology Co.,LTD www.feasycom.com

1. INTRODUCTION

FSC-BT836B is Feasycom’s dual-mode (BR/EDR and LE) Bluetooth 5.0 compliant module. It

supports SPP, HID, GATT, ATT, and other profiles. It provides several customizable hardware

interfaces such as UART, USB, PCM, I2C, AIO, PIO, etc.

FSC-BT836B incorporates high-performance MCU, Bluetooth controller and chip antenna in a

small package so that customers can integrate FSC-BT836B in small products.

FSC-BT836B uses UART as the programming interface, customers can use AT commands to

read or write the configuration of the module through UART. FSC-BT836B is powered by

Feasycom's Bluetooth stack which could provide more possibilities to the applications of

customers. For programming with FSC-BT836B, please refer to the relevant programming

user guide.

1.1 Feature

◆ Fully qualified Bluetooth 5.0/4.2/4.0/3.0/2.1/2.0/1.2/1.1

◆ Postage stamp sized form factor

◆ Low power

◆ Class 1.5 support(high output power)

◆ The default UART Baud rate is 115.2Kbps and can support from 1200bps up to 921.6Kbps

◆ UART, I

C ,USB hardware interfaces

◆ Support the OTA upgrade

◆ Embedded Bluetooth stack profiles support: SPP, HID,GATT, ATT, GAP

◆ Support Apple MFi (iAP2), iBeacon

1.2 Application

◆ Smart Watch and Bluetooth Bracelet

◆ Health & Medical devices

◆ Wireless POS

◆ Measurement and monitoring systems

◆ Industrial sensors and controls

◆ Asset tacking

Module picture as below showing