Data Sheet

FSC-BT956B Datasheet
Shenzhen Feasycom Technology Co., Ltd www.feasycom.com
-6-
2. General Specification
Table 1: General Specifications
Categories
Features
Implementation
Wireless
Specification
Bluetooth Version
Bluetooth v4.2 specification compliant, supports BR/EDR
Frequency
2.402 - 2.480 GHz
Transmit Power
+8 dBm (Maximum)
Receive Sensitivity
-85 dBm@0.1%BER (Typical)
Modulation
π/4 DQPSK , 8DPSK
Raw Data Rates (Air)
3 Mbps(Classic BT - BR/EDR)
Host Interface and
Peripherals
UART Interface
TX, RX,
Supports Automatic Flow Control (CTS and RTS lines).
General Purpose I/O
Default 115200,N,8,1
Baudrate support from 1200 to 921600
5, 6, 7, 8 data bit character
GPIO
14 (maximum – configurable) lines
O/P drive strength (10 mA)
Pull-up resistor (33 KΩ) control
Read pin-level
I2C Interface
1 (configurable from GPIO total). Up to 400 kbps
Audio CODEC
Embedded 24-bit stereo DAC and one channel 24 bits ADC
MIC/LINE-In-THDN: -82 dB, Dynamic
Range SNR: 93 dB (A-Weighted)
Headphone Output-THD:-85dB
Output Voltage:598mV rms
Sample Rate: 8, 11.025, 12, 16, 22.05, 32, 44.1 , 48 and 96 KHz
SD/TF/MMC
SD/TF Card Specification Version 2.0
SDIO Version 1.10
MMC specification Version 3.1
PWM
Up to 4 PWM output
16-bit resolution
8-bit prescaler and clock divider
Supports PWM interrupts
supports input capture function
Profiles
Classic Bluetooth
SPP (Serial Port Profile) - Up to 600 Kbps
Bluetooth Low Energy
No Support
Maximum
Connections
Classic Bluetooth
1 Clients(TBD)
Bluetooth Low Energy
No Support
FW upgrade
Debug
Via UART/SD Card/I2C(TBD)
Supply Voltage
Supply
2.4V ~ 4.35V
Power Consumption
Max Peak Current(TX Power @ +8dBm TX): 86mA