Data Sheet

FSC-BT958 Datasheet

Shenzhen Feasycom Technology Co., Ltd www.feasycom.com

-16-

To reduce signal reflections, sharp angles in the routing of the micro strip line should be avoided. Chamfers or

fillets are preferred for rectangular routing; 45-degree routing is preferred over Manhattan style 90-degree

routing.

Antenna

PCB

PCB PCB

Wrong Better Best

Figure 10: Recommended Trace Connects Antenna and the Module

Routing of the RF-connection underneath the module should be avoided. The distance of the micro strip line to the

ground plane on the bottom side of the receiver is very small and has huge tolerances. Therefore, the impedance

of this part of the trace cannot be controlled.

Use as many vias as possible to connect the ground planes.

10. PRODUCT PACKAGING INFORMATION

10.1 Default Packing

a, Tray vacuum

b, Tray Dimension: 180mm * 195mm