Data Sheet

FSC-BT958 Datasheet

Shenzhen Feasycom Technology Co., Ltd www.feasycom.com

-9-

4.5 Serial Interfaces

4.5.1 UART

FSC-BT958 provides one channels of Universal Asynchronous Receiver/Transmitters(UART)(Full-duplex asynchronous

communications). The UART Controller performs a serial-to-parallel conversion on data received from the peripheral

and a parallel-to-serial conversion on data transmitted from the CPU. Each UART Controller channel supports ten types

of interrupts.

This is a standard UART interface for communicating with other serial devices. The UART interface provides a simple

mechanism for communicating with other serial devices using the RS232 protocol.

When the module is connected to another digital device, UART_RX and UART_TX transfer data between the two

devices.

This module output is at 3.3V CMOS logic levels (tracks VCC). Level conversion must be added to interface with an

RS-232 level compliant interface.

Table 3: Possible UART Settings

Parameter

Possible Values

Baudrate

Minimum

1200 baud (≤2%Error)

Standard

115200bps(≤1%Error)

Maximum

921600bps(≤1%Error)

Flow control

Supports Automatic Flow Control (CTS and

RTS lines)

Parity

None, Odd or Even

Number of stop bits

1 /1.5/2

Bits per channel

5/6/7/8

When connecting the module to a host, please make sure to follow .

Module Host

TX RX

GND

Figure 4: UART Connection