Data Sheet

FSC-BT1026 Datasheet
Shenzhen Feasycom Technology Co.,Ltd
www.feasycom.com
-3-
2. General Specification
Table 1: General Specifications
Categories
Features
Implementation
Wireless
Specification
Chip
QCC30XX
Bluetooth Version
V5.1 Dual-mode
Frequency
2.402 - 2.480 GHz
Transmit Power
+6.221 dBm (Maximum)
Receive Sensitivity
-96.0 dBm (typ.) π/4 DQPSK receiver sensitivity
-89.0 dBm (typ.) 8DPSK receiver sensitivity
-100 dBm (typ.) BLE 1 Ms/s receiver sensitivity
Real-time digitised RSSI available to application
Raw Data Rates (Air)
3 Mbps (Classic BT - BR/EDR)
Host Interface and
Peripherals
UART Interface
TX, RX, CTS, RTS
General Purpose I/O
Default 115200,N,8,1
Baudrate support from 1200 to 4000000
GPIO
20 (maximum – configurable) lines
O/P drive strength (2, 4, 8, or 12 mA)
Pull-up resistor (33 KΩ) control
I
2
C Interface
1 I
2
C Master interface with speed up to 400 kbps
SPI Interface
SPI debug and programming interface with read access disable locking
ADC Interface
Analog input voltage range: 0~ 1.854V
10-bit ADC
1 channels (configured from GPIO total)
USB Interface
1 full-speed (12Mbps)
Audio CODEC
aptX, aptX HD, aptX Low Latency, SBC and AAC audio codecs
Configurable Signal Detection to trigger events
1 bank of up to 10-stage Speaker Parametric EQ
6 banks of up to 5-stage User Parametric EQ for music enhancement
Compander to compress or expand the dynamic range of the audio
Post Mastering to improve DAC fidelity
I²S/PCM outputs with crossover
USB audio
Stereo audio ADC with line input, stereo audio DAC
Supported sample rates of 8, 16, 32, 44.1, 48 and 96
kHz,192kHz(Input)
MIC SNR: 92 dB
MIC THD+N: 0.004%
Audio Output SNR: 100dBA typ
Audio Output THD+N: -90.5 typ