Product Codes PEGASUS LUXURY AT HAND R TM F10AE0027A BIMINI 24" WALL CABINET Toll Free Customer Assistance 1-877-355-3326 Monday-Friday, 9:00a.m. To 5:00p.m.
Please read instruction before assembly process 1 WALL CABINET INSTALLATION Figure 1 1. Place shelf clips (1) into predrilled holes of the wall cabinet (A). Then put the shelf (B) on it. A B WARNING The maximum loading should not exceed 50 lbs. This wall cabinet is intended for use only. If place other products heavier than the maximum loading weights indicated, which may result in instability causing possible injury.
Please read instruction before assembly process 2 WALL CABINET INSTALLATION Figure 2 1. Drill holes in wall to reflect predrilled holes on cabinet (A). Insert plastic wall anchors (1) in holes. 2. Insert screws (2) into plastic wall anchors (1). Hang cabinet on screws. 2 WARNING Young children can be killed when furniture tips over. Angle-braces or anchors MUST be used to secure the wall cabinet to wall.
Keeping Your Furniture Beautiful Quality wood furniture is a significant investment expected to last for generations. To maintain its beauty and help it last, wood furniture needs the right care. Pegasus Furniture products are finished with two or three coat of lacquer for extra depth and long-lasting durability. The sheen, or gloss, of the finish ranges from high to low, depending on the piece or collection. The finish protects the wood and adds to its beauty. No finish is totally indestructible.
Le recomendamos que lea las instrucciones antes de proceder con el proceso de ensamble 1 INSTALACI ÓN DEL GABINETE DE PARED Figura 1 1. Ponga los broches del estante (1) en los orificios previamente perforados del gabinete de pared (A). Luego ponga el estante (B) en él. A B ADVERTENCIA La carga má xima no debe superar las 50 libras. Este gabinete de pared debe usarse solo con ese peso. Si pone objetos má s pesados que la carga má xima, se puede presentar inestabilidad ocasionando lesiones.
Le recomendamos que lea las instrucciones antes de proceder con el proceso de ensamble 2 INSTALACI ÓN DEL GABINETE DE PARED Figura 2 1. Abra los orificios en la pared para acoplar con los orificios previamente perforados del gabinete (A). Inserte anclas de plá sticos para pared (1) en los orificios. 2. Inserte los tornillos (2) en las anclas de plá stico para pared (1). Cuelgue el gabinete en los tornillos.
Mantenga sus muebles en condiciones formidables Los muebles de madera de alta calidad representan una inversión significativa para que perduren de generación en generación. Para mantener la belleza de los muebles de manera y permitir una duración considerable, debe brindarles un cuidado especial. Los muebles Pegasus tienen un acabado con dos o tres capas de laca para brindar profundidad adicional y mayor durabilidad.