SDS

7. HANDLING AND STORAGE
Precautions for safe handling
Advice on safe handling
Keep away from open flames, hot surfaces and sources of ignition. Use personal protective
equipment as required. Keep container closed when not in use. Never return spills in
original containers for re-use. Keep out of the reach of children.
Conditions for safe storage, including any incompatibilities
Storage Conditions
Store in a cool/low-temperature, well-ventilated, dry place away from heat and ignition
sources.
Incompatible products
None known.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Guidelines
.
Chemical Name CAS-No ACGIH TLV OSHA PEL Mexico PEL
Benzyl Acetate 140-11-4 TWA: 10 ppm
Chemical Name CAS-No Alberta Quebec Ontario TWAEV British Columbia
Benzyl Acetate 140-11-4 TWA: 10 ppm
TWA: 61 mg/m
3
TWA: 10 ppm TWA: 10 ppm
No relevant exposure guidelines for other ingredients
Exposure controls
Engineering Measures Distribution, Workplace and Household Settings:
Ensure adequate ventilation
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Where reasonably practicable this should be achieved by the use of local exhaust
ventilation and good general extraction
Personal Protective Equipment
Eye Protection Distribution, Workplace and Household Settings:
No special protective equipment required
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Use appropriate eye protection
Hand Protection Distribution, Workplace and Household Settings:
For sensitive skin or prolonged use, wear gloves
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Protective gloves
Skin and Body Protection Distribution, Workplace and Household Settings:
No special protective equipment required
Product Manufacturing Plant (needed at Product-Producing Plant ONLY):
Wear suitable protective clothing
Page 4 / 8
96783109_RET_NG - Febreze Set & Refresh - Linen & Sky Revision Date: 10-Apr-2015