Chapter 1: Outline PAGE 1 - 1
Chapter 1: Outline 1.1 enFORCE Operation Manual About this Operation Manual This manual details the configuration, specifications and the operation of the enFORCE Digital Servo Press System. The following table outlines the contents of each chapter. Title Chapter Contents 1 Outline Basic characteristics and requirements of the enFORCE System. 2 Specifications General specifications of the enFORCE System. 3 System Description Description of standard and optional system components.
Chapter 1: Outline enFORCE Operation Manual 1.2 Features enFORCE is a Digital Servo Press System designed for use in both pressing and bonding applications in a low cost package. The system is a culmination of over twenty years of servo motor expertise based on our electric fastening system integrated with the latest digital servo technology. ☆ Compact Design As the result of miniaturization circuit technology, the compact units maintain a maximum width of 123.
Chapter 1: Outline enFORCE Operation Manual 1.3 Safety Precautions To ensure the most effective and extended use of all equipment, adhere to the following precautions: ¾ Tool Installation • The tool generates a great amount of force during operation and the reaction force is applied to the mounting area of the tool. Therefore, tools must be installed in the proper position and with adequate bolts.
Chapter 1: Outline enFORCE Operation Manual ¾ Electrical Noise Prevention • SAN units must be located a minimum of 600mm from high transient voltage sources such as transformers, motor starters, AC inverters and AC contactors. If it cannot be avoided, the unit must be shielded. • If high powered devices are used inside the enclosure, they must use a surge suppression device. • Make sure that the power supply lines and cables for connecting the unit and tool are not run together inside the same duct.
Chapter 1: Outline enFORCE Operation Manual SAN3-24S SAN3-120S PAGE 1 - 6
