User Guide

6)WiFI config
Click >>WiFI Setting >>“Manage Wi-Fi networks” ,choose your Wi-Fi
router (ONLY 2.4G) ,enter your Wi-Fi password and click "OK"(image 7).
Refresh the page after 30s,If succeeded, the SSID will show the name of
your home network (image 8);
Only Wi-Fi config successfully, you can remotely control the camera.
7. 8.
If your Wi-Fi name not shows or camera shows offline,it means the Wi-Fi config
failed, please press the page to remove the device (image 9),check if your home
network name contains unrecognized characters or the password is wrong and
repeat step 4.
9.
When the camera is successfully connected to WIFI, the camera will
turn off its own ‘’hotspot’’. If you need other mobile phones to access,
just add the device and enter the camera's password.
7)Change camera password