Installation Guide

www.federalbrace.com [phone]
Note this installation document should not be considered a specic recommendation for your particular application. Federal Brace
cannot provide installation guidelines to meet the particulars of every application. This document should be considered a help sheet
that provides considerations about the general characteristics of a particular type of product and installation.
NoMarr is Designed to protect various surfaces, metal, wood and plastics to name a few. NoMarr can be used for many applications
and industries. Federal Brace offers NoMarr both with and without fasteners. Using NoMarr is quick and easy, just follow the simple
four-step process below.
NoMarr Installation Instructions
NoMarr Surface Protection | NoMarr
2. Using a socket or driver tool, tighten the fastener down
completely. Do not remove NoMarr until the fastener is in its
nal position. See Spec Sheet for NoMarr sizing and compatible
fasteners. Use NoMarr with screwdrivers for slip protection.
1. Place the fastener through the hole in the Nomarr. The
NoMarr should be positioned between the head of the fastener
and the surface you want to protect.