Cut Sheet

6 8

FEATURES

ModelLP3LlowproleLEDlightisofferedinfourmountingcongurations;LP3PLwithanintegrated1/2"NPTpipe

mount,LP3MLfeaturesanintegrated1/2"NPTmalepipemount,LP3TLfeaturesaTformationbasewith2mounting

holes for wall or ﬂush mounting and the LP3SL features a three hole surface mounting conﬁguration. The T-mount and

Surface mount units include surface gaskets to maintain the 4X installation.

All models include the vibration resistant, double contact bayonet style 50,000 hour LED module.

Like all StreamLine

products, the LP3L is designed with OEM applications in mind. It is economical, easy to install and

attractive. Careful consideration has been given to the relationship between the LED light source and the lens design for

maximum light output.

When your application calls for a compact signal with unparalleled reliability, Federal Signal’s StreamLine products are the

clear choice.

• Availablein24VDCand120VAC

• T-mount(TL),integrated1/2-inchNPTpipemount(PL),

1/2-inchNPTmalepipemount(ML)orsurfacemount(SL)

• Fivelamp/lenscolors:Amber,Blue,Clear,GreenandRed

• 50,000HourLED

• Screwonlens

• Indoor/Outdooruse

• Type4Xenclosure

• Optionalwirelensguard

• PLCCompatible

• ULandcULListedandCSACertied

Model LP3SL, LP3PL, LP3TL, LP3ML

StreamLine

Low Proﬁle

Steady Burning LED Light

MODEL VOLTAGE OPERATING CURRENT

LP3 * L-024 ** 24VDC 0.08 amps

LP3 * L-120 ** 120VAC 0.13 amps

* Indicates Mounting Style: (S) Surface Mount, (P) Pipe Mount, (T) T-Mount, or (M) Male Pipe Mount

** Indicates color: (A) Amber, (B) Blue, (C) Clear, (G) Green or (R) Red

PAGE 1
Model LP3SL, LP3PL, LP3TL, LP3ML StreamLine® Low Profile Steady Burning LED Light Model LP3L low profile LED light is offered in four mounting configurations; LP3PL with an integrated 1/2" NPT pipe mount, LP3ML features an integrated 1/2" NPT male pipe mount, LP3TL features a T formation base with 2 mounting holes for wall or flush mounting and the LP3SL features a three hole surface mounting configuration. The T-mount and Surface mount units include surface gaskets to maintain the 4X installation.
PAGE 2
LP3SL V I S U A L StreamLine® Low Profile Steady Burning LED Light (LP3SL/LP3PL/LP3TL/LP3ML) LP3PL 3.13" / 79.5 mm Lens S I G N A L S Housing Screw 4.97" / 126.2 mm Lens Gasket 1/2" Pipe Mount LED Housing, LP3M Ø2.50" / 63.5 mm LP3TL Gasket, LP3M 3x .150" 3.8 mm 3x 120˚ Housing Mounting Surface Ø.50" 12.7 mm T-mount Gasket Locknut 1.43" / 36.