Cut Sheet

368
These multi-purpose, initiating devices cover a wide range of industrial and commercial applications. The Federal Signal
push-button stations function like a traditional fire alarm “pull station”, providing a simple contact closure to activate
emergency equipment, audible and visual signals and alarm panels.
Each unit is available with or without a tamper-resistant polycarbonate cover. Covered units work to protect against
physical damage to the station and to prevent false alarms without restricting use in emergency situations. When the
cover is lifted to gain access to the alarm, a piercing tone sounds, calling immediate attention to the area. The piezo
horn is quiet once the cover is closed. Power to the piezo alarm is provided by a 9 Volt battery (included). The sounder
cover mounts easily over the station with four anchor screws.
The terminal block provides easy installation and maintenance. Units mount on existing single-gang electrical boxes or
4” x 4” electrical boxes with plaster ring adapters (customer supplied).
Contact ratings for the Push Button Stations are 600VAC @ 3 amps and 250VDC @ 1 amp.
FEATURES
• ADA Compliant
• UL and cUL Listed and CSFM Approved
• ADACompliant
• ULandcULListedandCSFMApproved
ModelPSSeries
Push Button Stations
MODEL DESCRIPTION
PUSH BUTTON STATION
PSEV-Y Yellow Station with Push & Turn Reset Button — “EVACUATION”
PSEM-R RedStationwithPush&TurnResetButton—“EMERGENCY”
PUSH BUTTON STATION WITH SOUNDER COVER
PSEVSC-Y Yellow Station with Push & Turn Reset Button & Sounder Cover — “EVACUATION”
PSEMSC-R
Red Station with Push & Turn Reset Button & Sounder Cover — “EMERGENCY”
Note: Other colors and text available upon request.