Technical Specifications

Easy-to-install, prefabricated cable assemblies are an attractive, budget-friendly,
and low-maintenance alternative to commonly used metal and wood picket infill. Assemblies use 1/8'' diameter high-strength,
weather-tough type 316 stainless steel cable and come in a wide range of standard lengths that can be quickly trimmed to size in
the field. Each assembly includes special, easy-to-use Threaded Terminal and Quick-Connect
®
SS end fittings that remain concealed
in your end posts. The result: an extremely durable, virtually invisible railing infill that leaves the view open and unimpaired.
Our special end fittings make cable installations quicker & easier than ever.
The Cable is 1/8” diameter, 1x19 construction,
type 316 stainless steel for strength, durability,
and weather protection. Cables come in standard
assembly lengths from 5 feet to 70 feet.
The stainless Quick-Connect
®
SS
fitting is attached to the cable in the field
without special tools. One-way jaws allow
the cable to easily slide through the fitting
in one direction but automatically grab
and lock-on when the cable is released.
Just slip it on, pull the cable tight, cut off
the excess, and finish with an End Cap.
Size: 3/8” O.D. x 1-1/4” Length
Snug-Grip
®
Washer-Nut and Flat
Washers are all included. Colored
and Stainless End Caps are also
available to cover, protect, and finish
both ends (caps sold separately).
The stainless Threaded Terminal
fitting is fastened (swaged) to one
end of the cable at the factory.
Attach it to an end post using a
special Snug-Grip
®
Washer-Nut and
spin the nut to adjust final tension in
the line. Finish with an End Cap.
Size: 1/4” O.D. x 7-1/2” Length (for Wood)
Size: 1/4” O.D. x 4-1/4” Length (for Metal)
End Cap
Flat Washer
Flat Washer
End Cap
Snug-Grip
®
Washer-Nut
CableRail Assemblies are designed to
be used on your own wood or metal
frames in either interior or exterior
settings.