Installation Instructions

1-800-888-2418 | www.feeneyinc.com

Once all pickets have been installed, the railing frame will be ready for installing the cables. Follow the CableRail by Feeney installation

instructions to complete the railing inll installation. If you have questions, please call us at1-800-888-2418.

• Slide the picket into position and verify that it is plumb.

• Confirm that all picket cable holes are properly aligned with holes in the

posts.

• Drill 1/8”diameter pilot holes for the screws (softer woods may need a

smaller pilot drill).

• Secure the picket into position with screws.

STEP 4 - Attach Picket to Railing

(without bottom rail)(with bottom rail)

• Screw the Base Plates to both ends of the picket using an electric drill

with a #2 square drive bit.

Important Note: To ease installation and prevent possible screw

head damage, lubricate the screw threads with wax or soap prior to

attachment and drive the screws slowly and smoothly with minimal

stopping and starting. In addition, be sure to firmly secure the picket

so that it won’t move during attachment of the base plates.

STEP 3 - Attach Base Plates

use angled countersink

hole for sloped applications

use straight countersink

hole for level applications

Installation Instructions

Feeney

Intermediate Picket (SKU#7649) - For Stair Railings Only

v 04/2013