Electrical connection radio wind/sun sensor remote control System Assembly Product Appearance
1、Electrical Specifications Transmission Frequency: 868.
2、Exterior Color Silver Grey Black 3、Function Description AAT173 Transmitter，controls receiver AA1152 Receiver, controls motor rotating direction Receiver can learn up to 15 transmitters 4、Button Function Leran Button: press and hold for 7 seconds to activate learn mode, receiver will beep 3 times and continues with 1 beep/second up to 20 seconds. Module will beep three times per second if receive signal from transmitter indicate successfully learned.
activate yarn retraction. ¾ When wind speed continues to be greater than set value for 3 minutes continuously, send command to activate yarn retraction. ¾ When fan speed is greater than set speed for 2 seconds consecutively, send signal for yarn retraction, after retraction, if wind speed is lower than set value then speed up to be greater than set speed, send over set speed command to retract yarn..
FCC Compliance Statement: This device complies with Port 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
