Manual Instruction 1 11 1
Thanks for purchasing this product .The product will help you keep fitter, healthier and better in a very easy way. User Guide 1. Always connect the power plug to a socket with a grounded circuit and the socket must have a special circuit to avoid sharing with other electrical equipment. 2. Ensure the treadmill stable on the ground before use. 3. Check if its function normal or not before running. 4. Stand on two side rails when the treadmill starts 5.
◆ Pull out the power plug gently from the socket. ◆ Stop the machine if anything wrong and cut the power immediately. ◆ Ask local distributor to handle any issue or provide service. Dismantle the components personally is not allowed. DANGER! To reduce accidents or harm, please check following rules. ◆ Ensure your clothes zipped up before running. ◆ Do not wear clothes that easily hooked. ◆ Keep power cord away from hot objects. ◆ Keep children away from the treadmill.
Prohibit! ◆ Following patients under treatment need to get use of the treadmill after approval of professional doctor. ◆ （1）The person with backache or used to get hurt in the leg ,waist ,neck . Those with numbness of legs, waist, neck and hands (those with chronic diseases such as inter vertebral disc protrusion, spinal slip, cervical vertebra protrusion, etc.) ◆ （2）The patient with deformational arthritis , rheumatism or gout . ◆ （3）The patient with osteoporosis .
◆ when using, taking out, putting back or moving this product, please make sure there is nobody or pets around. ◆ Stop use this product when the cover cracked (inner parts come out) or welded parts drop off, may cause danger or injury. ◆ Do not jump up or down from the treadmill when running, may fall down and get injury. ◆ Do not use or reserve the treadmill outdoor or near bathroom to avoid water.
injury. ◆ Do not use the product when you have hard object in your pocket, may cause accident or injury. ◆ The power plug cannot be attached with needle, waste or water, may cause electric shock, short circuit and fire. ◆ Do not pull out the plug or switch the power to “off” while operating, may cause injury. ◆ Do not operate with wet hands！ ◆ Do not pull out or insert the plug with wet hands, may cause electric shock or injury. ◆ Remember to pull out the plug when not using.
Explosive drawing 7
Parts list No Description QTY 1 Main frame 1 2 Motor mount 1 3 Foot link weldment 2 4 Right rotation fixed plate 1 5 Left rotation fixed plate 1 6 Step rotating fixed plate 2 7 Foot link fixing plate 2 8 switch fixing plate 1 9 Left stand post 1 10 Right stand post 1 11 Monitor frame 1 12 Monitor bracket 1 13 speed sensor 1 14 Incline frame 1 15 filter 1 16 controller 1 17 inductance 1 18 Safety key 1 19 Plug socket 1 20 Incline motor 1 21 Rock
39 foot folding rod 1 40 upper motor cover 1 41 lower motor cover 1 42 Rear cover 1 43 Feet pad cover 2 44 Side rail 2 45 stretch foot pad 2 46 Adjustable cushion 2 47 Magnetic ring 1 48 communication wire 1 49 Cover of left stand post 1 50 Cover of right stand post 1 51 Button 2 52 left stand post cap 1 53 right stand post cap 1 54 Crank cover 2 55 Monitor tray upper housing 1 56 Monitor tray lower housing 1 57 Anti-sliding sheet 1 58 Monitor 1 59
80 Hexagon socket head large flat head half tooth bolt M8×50×20 81 M6 Step gasket 2 81 Hexagon socket head pan head full thread bolts M6×15 2 82 Cross recessed large flat head self-tapping screw ST4×16 38 83 Cross recessed large flat head full tooth bolts M4×10 2 84 Hexagon head full thread bolts M8×50 4 85 Cross recessed countersunk head tapping screw ST3×10 6 86 Cross recessed countersunk head tapping screw ST4×15 10 87 Cross recessed large flat head self-tapping screw ST4×10 2 8
Packing list Manual Treadmill Safety key Silicon oil Cross Wrench 14×17×75 11 Wrench
Main parts Front roller Running board Motor cover Motor Rea roller Running belt Side rail console Console frame 12 Rear cover
Treadmill instruction Console Handle pulse Safety key button Stand post Running belt Motor cover Side rail Folding stick Rear cover Technical information 120Kg Max load Dimension Fold：1700*790*270mm Unfold：1700*790*1280mm Running surface 1400*500mm Speed 1.0－18.0Km/h Remark：WE RESERVE THE RIGHT TO AMEND THE PRODUCT WITHOUT PRIOR NOTICE.
Unfold instruction Step 1： Taking the treadmill out of the box, then turn out the foot folding rod (1) from the underside of the running deck with your foot , and then lift the stand post( 2) directly when you step on the foot folding rod. Step2：After lifting the stand post, hold handle bar (1) with one hand and pull up the monitor tray (2) with the other hand.
Folding instruction Step 1：Push down the monitor to be same level of monitor tray as right picture Step 2：Press the button (1) and then lay down the monitor tray as right picture. Step 3： Step firmly on the foot folding rod (1) with your foot and the stand post will lay down slowly.
Step 4： Pull off the power cord from the front of treadmill, then pull out the two stretch foot pad (1) as below picture, and then lift the treadmill to stand on the ground. (Caution: Do not strike after standing up.
MONITOR FUNCTION INSRTUCTION LED windows For speed adjustment For incline adjustment 1. 1．1 Monitor function P0 is the user manual program, P1-P36 are built-in automatic training programs, 3 USER programs and BMI; 1．2 LED display, 12 operation keys； 1．3 Speed and distance conversion function between metric and inch； 1．4 Operating speed range: km 1.0~18.
2 LED window display： 2．1 “DISTANCE”“TIME” window： Display numerical values for distance and time； 2．2 “CALORIES” window：Display the number of calories； 2．3 “INCLINE” window：Display the value of the incline； 2．4 “PULSE” window：Displays the value of the heart rate； 2．5 “SPEED” window：Display speed value； 3 Metric-Imperial Conversion Instructions： 3.1 Pull off the safety key and then press the "PROGRAM" and "MODE" keys at the same time, the 3.
5. Safety key： The safety key consists of a tact switch, a clothespin and a nylon rope, and has the safety precaution function of emergency stop. In any state, as long as the safety key is out of position, the treadmill stops running, the keyboard of the electronic watch is forbidden to operate, and the screen displays "E-07" with a prompt tone. Each time the security lock is placed, the screen will be fully displayed for 2 seconds, and then enter the default working state of the system. 6.
"-" keys to modify the setting value, the setting range: 20-990 CAL, the default value: 50 CAL; b) "P1-P36" is the system setting program, it only trains in the countdown time mode, the time window flashes in the setting state, press the "+" and "-" keys to modify the set value, and press the "MODE" key to reset to the default value , setting range: 5-99MIN, default value: 30:00. 7.
7.11 Body fat test method: Press the "PROGRAM" key to select the program BMI, press the "MODE" key to select the item number, and press the "+" and "-" keys to set the parameters.
Automatic program P1-P36 metric speed table PROG LEVEL CLS. 1 2 3 4 5 6 7 8 9 10 2.0 SPEED 1.0 3.0 5.0 5.0 5.0 7.0 7.0 5.0 3.0 INCLINE 2 2 8 6 6 4 4 6 2 2 SPEED 2.0 3.0 5.0 8.0 5.0 5.0 6.0 8.0 4.0 3.0 P1 P2 INCLINE 3 3 2 2 8 8 4 4 4 4 SPEED 2.0 3.0 7.0 8.0 5.0 5.0 5.0 8.0 4.0 3.0 P3 INCLINE 1 2 5 7 7 4 4 6 2 2 SPEED 2.0 2.0 5.0 8.0 8.0 8.0 8.0 5.0 3.0 2.0 P4 INCLINE 3 3 9 9 9 9 9 6 2 2 SPEED 3.0 4.0 8.
P18 SPEED 4.0 5.0 7.0 8.0 8.0 8.0 10.0 11.0 6.0 4.0 INCLINE 2 9 9 8 8 8 8 6 4 2 3.0 SPEED 4.0 5.0 5.0 11.0 5.0 10.0 5.0 12.0 4.0 INCLINE 2.0 2 7 7 7 9 9 11 7 3 SPEED 4.0 6.0 8.0 10.0 4.0 6.0 8.0 6.0 12.0 6.0 P19 P20 INCLINE 4 4 4 8 8 4 4 4 6 6 SPEED 4.0 8.0 11.0 5.0 8.0 12.0 6.0 5.0 12.0 7.0 INCLINE 4 7 8 4 9 9 4 9 5 5 4.0 P21 SPEED 4.0 6.0 10.0 11.0 7.0 7.0 10.0 7.0 12.
USE INSTRUCTION About folding 1. When preparing to fold the unit, the power must be turned off； 2. Raise the treadmill to an upright position； 3. When lowering the treadmill, first hold the treadmill with your hands, step on the iron hook with your feet, and then slowly lower it to lower the treadmill to the ground.
6. During the movement, you can press the “stop” key at any time to stop the motor from running. 7. Preset Mode Use. Turn on the power supply, turn on the power switch, after the display is normal, press the "Program" button to select one of the automatic running modes as the current mode to run, press the "Start" button to start the treadmill, and the treadmill starts to run automatically according to the selected mode.
Treadmill Maintenance Proper maintenance is very important to ensure a faultless and operational condition of the treadmill. Improper maintenance can cause damage to the treadmill or shorten the life of the product. All parts of the treadmill must be checked and tightened regularly. Worn out parts must be replaced immediately. BELT ADJUSTMENT You may need to adjust the running belt during the first few weeks of use. All running belts are properly set at the factory.
above steps if it is necessary. If the above procedure is unsuccessful in resolving the off-centre, you may need to increase the belt tension. LUBRICATION The treadmill is factory-lubricated. However, it is recommended to check the lubrication of the treadmill regularly, to ensure an optimal operation of the treadmill. It is usually not necessary to lubricate the treadmill in the first year or the first 500 hours of operation.
Trouble shooting Item Reason Maintenance A、Not plugged in or not turned on System not working B、Security key not in place C 、 No power to the controller or Replace the controller or monitor monitor Check system input and output cable terminals D、Poor cable connection and communication cables inside stand post Replace the safety key Please call after-sales service 1. Replace the key board and the keyboard cable; 2. Replace the PCB board 3. Replace the monitor.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
