User Manual

2 LED window display
：
2．1 “DISTANCE”“TIME” window： Display numerical values for distance and time；
2．2 “CALORIES” window：Display the number of calories；
2．3 “INCLINE” window：Display the value of the incline；
2．4 “PULSE” window：Displays the value of the heart rate；
2．5 “SPEED” window：Display speed value；
3 Metric-Imperial Conversion Instructions
：
3.1 Pull off the safety key and then press the "PROGRAM" and "MODE" keys at the same time, the
display shows 0.6, which means converting from kilometers to miles;；
3.2 Pull off the safety key and then press the "PROGRAM" and "MODE" keys at the same time, the
display shows 1.0, which means converting from miles to kilometers；
4 Key button operation Instructions
：
4．1 “PROGRAM”
：
Program select key: when the treadmill is stopped, cycle select the program
“P0-P36 U01~U03 FAT” as you prefer.
4．2 “MODE”
：
When the initial state of manual mode is selected, it is normal mode. Under manual
mode, press the MODE button to cycle select the countdown time mode -> countdown distance
mode -> count down calories -> normal mode; The reposition of default countdown time is 30
minutes for P1-P36 program.
4．3 “START/PAUSE”
：
When the treadmill is stopped, press the this key to turn on the treadmill.
When the treadmill is running, press this key to pause treadmill.
4．4 “STOP”
：
In the running state, press the STOP button to slow stop; When displaying ERR
prompt information, press it to clear the displayed information.
4．5 “
＋
”
：
Speed increment key, in stop or BMI state, this key is used to set parameter increment. In
the running state, it is used to increase speed.
4．6 “
－
”
：
Speed decrement key, in stop or BMI state, it is used to set parameter decrement. In
running state, it is used to decrease speed.
4．7 “QUICK SPEED 6/9”
：
Speed instant keys, in the running state of the treadmill, directly set the
speed to the specified value of the key.
4．8 “ ”
：
Incline Increment Key.
4．9 “ ”
：
Decrease slope key.
4．10 “QUICK INCLINE”
：
6, 9 Incline instant keys, in the running state of the treadmill, directly set
the speed to the specified value of the key.
18