User Manual

5. Safety key：
The safety key consists of a tact switch, a clothespin and a nylon rope, and has the safety
precaution function of emergency stop. In any state, as long as the safety key is out of position,
the treadmill stops running, the keyboard of the electronic watch is forbidden to operate, and the
screen displays "E-07" with a prompt tone. Each time the security lock is placed, the screen will be
fully displayed for 2 seconds, and then enter the default working state of the system.
6. USER mode:
In the USER mode, user can access or set your own sport program, press “PROGRAM” key to
cycle select “U01-U03”, then press “MODE” key to set parameters, or press the “STRAT” key to
start running directly. Press “MODE” key can set your own program (10 sections of speed and
incline). After setting, user can press “START” to exercise. The exclusive program for user will be
saved and user can use it directly next time.
7. Guidelines for Safe Use：
7.1 Insert the plug of the power cord into the 10A power socket with safety grounding, turn on the power
switch, the screen of the monitor is fully displayed and accompanied by a prompt sound, and
then identify the safety key；
7 . 2 Put the safety key in the position on the console, put the clothespin on the clothes of your chest,
and enter the default working state after the screen is fully displayed for 2 seconds. All the counters
are cleared, the set values are reset, and the treadmill is in the positive timing mode of manual
program P0；
7 . 3 Press the "PROGRAM" key to cycle select the automatic program：P0~P36
；
U01,U02,U03,BMI
；
a )
P0" is a user-defined program. Press the "MODE" key to cycle select four training modes. The
training speed and incline are set by the user. The default values are: speed 1.0KM/H and incline
0%.
Training mode 1：Time counting, time, distance, and calories are counted up, and the setting
function is turned off；
Training mode 2
：
Countdown time, the time window flashes in the setting state, press "+", "-" key to
modify the setting value, setting range: 5-99 minutes, default value: 30:00;
Training mode 3：Countdown distance, the distance window flashes in the setting state, press the "+",
"-" keys to modify the setting value, the setting range: 1.0-99.0KM, the default value: 1.0KM；
Training mode４：Count down calories, the calorie window flashes in the setting state, press the "+",
19